A Computer-aided Design System for Framed-mould in Autoclave Processing

+ 作者地址


0
  • 摘要
  • 参考文献
  • 相关文章
  • 统计
The general computer-aided design (CAD) software cannot meet the mould design requirement of the autoclave process for composites, because many parameters such as temperature and pressure should be considered in the mould design process, in addition to the material and geometry of the part. A framed-mould computer-aided design system (FMCAD) used in the autoclave moulding process is proposed in this paper. A function model of the software is presented, in which influence factors such as part structure, mould structure, and process parameters are considered; a design model of the software is established using object oriented (0-0) technology to integrate the stiffness calculation, temperature field calculation, and deformation field calculation of mould in the design, and in the design model, a hybrid model of mould based on calculation feature and form feature is presented to support those calculations. A prototype system is developed, in which a mould design process wizard is built to integrate the input information, calculation, analysis, data storage, display, and design results of mould design. Finally, three design examples are used to verify the prototype.

[1] D.C.Blest S.Mckee .Curing simulation by autoclave resin infusion[J].Composites science and technology,1999(16):2297-2313.

[2] R. de Oliveira;S. Lavanchy;R. Chatton .Experimental investigation of the effect of the mould thermal expansion on the development of internal stresses during carbon fibre composite processing[J].Composites. Part A, Applied science and manufacturing,2008(7):1083-1090.

[3] C.-H. Chu;M.-C. Song;V.C.S. Luo .Computer aided parametric design for 3D tire mold production[J].Computers in Industry,2006(1):11-25.

[4] M. W. Fu .The application of surface demoldability and moldability to side-core design in die and mold CAD[J].Computer-Aided Design,2008(5):567-575.

[5] K.W. Tam;K.W. Chan .Thermoforming mould design using a reverse engineering approach[J].Robotics and Computer Integrated Manufacturing: An International Journal of Manufacturing and Product and Process Development,2007(3):305-314.

[6] Z. Lou;H. Jiang;X. Ruan .Development of an integrated knowledge-based system for mold-base design[J].Journal of Materials Processing Technology,2004(1/2):194-199.

[7] Yong-Sheng Ma;Shu Beng Tor;Graeme A. Britton .The development of a standard component library for plastic injection mould design using an object-oriented approach[J].The International Journal of Advanced Manufacturing Technology,2003(9/10):611-618.

[8] C. K. Mok;K. S. Chin;Hongbo Lan .An Internet-based intelligent design system for injection moulds[J].Robotics and Computer Integrated Manufacturing: An International Journal of Manufacturing and Product and Process Development,2008(1):1-15.

[9] Nagahanumaiah;K. Subburaj;B. Ravi .Computer aided rapid tooling process selection and manufacturability evaluation for injection mold development[J].Computers in Industry,2008(2/3):262-276.

[10] Zuozhi Zhao;Jami J. Shah .Domain independent shell for DfM and its application to sheet metal forming and injection molding[J].Computer-Aided Design,2005(9):881-898.

[11] S.H. Tang;Y.M. Kong;S.M. Sapuan .Design and thermal analysis of plastic injection mould[J].Journal of Materials Processing Technology,2006(2):259-267.

[12] A. Bendada;A. Derdouri;M. Lamontagne;Y. Simard .Analysis of thermal contact resistance between polymer and mold in injection molding[J].Applied thermal engineering: Design, processes, equipment, economics,2004(14/15):2029-2040.

[13] 岳广全,张博明,杜善义,戴福洪,张铖,梁宪珠,王永贵.热压罐成型工艺所用框架式模具的变形分析[J].复合材料学报,2009(05):148-152.

[14] Sang Hun Lee .A CAD-CAE integration approach using feature-based multi-resolution and multi-abstraction modelling techniques[J].Computer-Aided Design,2005(9):941-955.

[15] C.Zhang .Curing temperature field tradeoff design method of large-scale composite material structure in autoclave procees[D].Harbin Institute of Technology,PRC,2009.


DOI: http://dx.doi.org/10.1007/s11633-010-0501-0

语种: 英文   


期刊热词
  • + 更多
  • 字体大小